Hi,
Last week one of our ESXi machines died. We got a replacement and successfully managed to roam the drives over.
We didn't loose any data so that's great.
Now we're at the moment to fire the VSA back on. But we don't know what the expect and the right procedure is.
The VSA was down for over a week.
The VSA runs in a cluster with network RAID 10.
Hope this is sufficient information, if need any more please let me know.
Thanks!
Fernando
Does anyone know how to enable mult-connections to a volume on an MSA 2012i? The array has one volume setup this way and I can't for the life of me figure out how it was done. I'm setting up a HyperV cluster, which is why I need this capablity for a second volume on the stack. I have searched The Google for hours and cannot find any information on this.
Thanks for you help!
Hi All,
I am having issues finding an upgrade path or files for our old Lefthands. They are P4500 and are still running 8.1.00.0047.0 the upgrade using FTP doesnt work and i really need to get these upgraded any idea's?
Hi,
Is there any configurable parameter in scli which can avoid a rescan of devices when there is connection failure between the server and Storage array? The storage array is an XP array and the server has the Qlogic FC card.
Thanks
Hi,
I have a problem hsv450 xcs 11300000 controller A battery 2 and 3 , I already changed the batteries and the controller. Continues to exhibit the same problem. Any tips or help ?
Hi guys,
I have some problem with my storage.
I'm using storage HP P6530. Today, i choose the partition to mount on vmware. The partition was convert format from ntfs to vmfs. The partition lost every data. Anđ now i want to find some important data on the old partition. How can i do to recovery data?
Hi,
We are using 4400 EVA controller in our organization. Both Controller reboot frequently automatically since last weeks .Current firmware ver. of eva is 10001000.
Please help i am sharing eva logs..
Hello,
I have a question to ask about the configuration of SRM 5.1 with two EVA8400 and HP EVA Storage Replication Adapter version 5.01.00
I configured SRA as from manual HP StorageWorks HP EVA Storage Replication Adapter version 5.01.00 for VMware vCenter SRM Administrator Guide page 17:
In case array management is subject to change, and if the local HP Command View EVA Server does
Not actively manage the array, the following configuration can be used:
1. At the protected site Storage Admin portal, add the HP Command View EVA server local site.
2. Add the EVA array EVA array and Recovery site to EVA array (see Figure 14 (page 18)).
3. Configure the Remote Site Details (see Figure 15 (page 18)) and enter the details of Recovery
Site Array Manager (see Figure 16 (page 19)).
4. Repeat these steps for Recovery site Storage Admin Portal. In step 3, enter the Primary site
Array Manager details.
By implementing this configuration in array manager of the primary site , the one that manages both EVAs all is oK,while the second site returns the following error:
SRA command 'discoverArrays' failed. SRA operations failed
Check SRA services and CV servers
I think it's a normal situation because at this time the secondary site does not manage any storage.
My reasoning Is correct?
Thank you
regards
Hi
I have EVA6000 and old appliance server with Windows 2000 and CommandView Eva 6.0.2.37. I want to get installed license from this CommandView and install on other server. But in CommandView "View License Keys" is empty. I tried to search for *.lic files on server disks (Program Files and so on), but don't find anything.
Please help me to find me installed license.
I recently obtained a StorageWorks EVA 8100 unit from another department, which we are planning on integrating into our existing storage infrastructure that consists of 2 smaller EVA units. The problem that I have run into is that I am limited in the size of vdisk I can create (2TB limit). I do not have this issue on the evisting EVA units.
The EVA8100 is running the XCS 6.25 firmware and is being managed through CommandView 10.3. I am running CommandView on the 60-day Instant-On license while I evaluate if this particular harware will integrate effectively into our infrastructure, but do not want to deal with the expense if it will not help the issue.
Has anyone else run into this issue, and have you been able to have a vdisk created that is larger than 2047GB? I am looking to configure a vdisk of at least 20TB on this particular EVA to match with what is in use on the existng EVAs.
Salve,
la storage in oggetto è equipaggiata con 12 hdd di due tagli diversi: 450 GB (x4) e 600 GB (x8).
Esistono due Vdisks:
- il primo utilizza i 4 hdd da 450 GB
- il secondo utilizza 7 hdd da 600 GB
L'ultimo disco da 600 GB è utilizzato come Global Spare
Uno degli HDD da 450 GB si è guastato ed il sistema lo ha rimpiazzato automaticamente con il GS.
Il cliente ha sostituito il disco da 450 GB guasto che è stato configurato come nuovo GS.
Vorrei ripristinare quest'ultimo disco come membro del primo vdisk e riconfigurare il disco da 600 GB come GS.
Non conosco molto questo storage e pensavo che per farlo avrei dovuto espandere il vdisk aggiungendo il disco da 450 GB e successivamente rimuovere quello da 600 GB.
Esiste una soluzione più semplice?
Grazie
Good day gurus!
I am looking for an upgrade path for my Brocade FC switches to the latest supported version. The current version is:
Fabric OS (swd77)
Fabos Version 5.3.0
Regards,
Rianui
Where can i find EOL or retired information on Storage Works RA450?
Need help urgently
Thanks for your help.
Hello
We have the following error on a MSA Storage P2000 G3:
On Webinterface: A subcomponent of this component is unhealthy
Putty: shwo enclosure-status
Output:
FAN 01 OK 592267-002 CN8247T672 -- FAN 02 OK 592267-002 CN8247T673 -- PSU 01 OK 592267-002 CN8247T672 -- PSU 02 OK 592267-002 CN8247T673 -- Temp 01 OK AW592B CN8320M988 temp=39 C Temp 02 OK AW592B CN8334N249 temp=36 C Temp 03 OK 592267-002 CN8247T672 temp=33 C Temp 04 OK 592267-002 CN8247T673 temp=37 C Voltage 01 OK AW592B CN8320M988 voltage=11.86 Voltage 02 OK AW592B CN8320M988 voltage=5.03 Voltage 03 OK AW592B CN8334N249 voltage=11.86 Voltage 04 OK AW592B CN8334N249 voltage=5.03 Voltage 05 OK 592267-002 CN8247T672 voltage=11.98 Voltage 06 OK 592267-002 CN8247T672 voltage=5.06 Voltage 07 OK 592267-002 CN8247T672 voltage=3.38 Voltage 08 OK 592267-002 CN8247T673 voltage=12.01 Voltage 09 OK 592267-002 CN8247T673 voltage=5.05 Voltage 10 OK 592267-002 CN8247T673 voltage=3.38 Disk 01 OK 582938-002 2S6301C074 addr=0 Disk 02 OK 582938-002 2S6301C074 addr=1 Disk 03 OK 582938-002 2S6301C074 addr=2 Disk 04 OK 582938-002 2S6301C074 addr=3 Disk 05 OK 582938-002 2S6301C074 addr=4 Disk 06 OK 582938-002 2S6301C074 addr=5 Disk 07 OK 582938-002 2S6301C074 addr=6 Disk 08 OK 582938-002 2S6301C074 addr=7 Disk 09 OK 582938-002 2S6301C074 addr=8 Disk 10 OK 582938-002 2S6301C074 addr=9 Disk 11 OK 582938-002 2S6301C074 addr=10 Disk 12 Abwesend 582938-002 2S6301C074 addr=11
Putty: Show system
Health: Beeinträchtigt Health Reason: Eine Unterkomponente dieser Komponente ist nicht funktionstüchtig. Supported Locales: English (English), Spanish (español), French (français), German (Deutsch), Italian (italiano), Japanese (æ¥æ¬èª), Dutch (Nederlands), Chinese-Simplified (ç®ä½ä¸æ), Chinese-Traditional (ç¹é«ä¸æ), Korean (íêµì´) Unhealthy Component ------------------- Component ID: Gehäuse 1, Controller A, CompactFlash Health: Fehler Health Reason: Die Komponente ist nicht vorhanden. Health Recommendation: - Ersetzen Sie die FRU, die diese Komponente enthält. Unhealthy Component ------------------- Component ID: Gehäuse 1, Controller B, CompactFlash Health: Fehler Health Reason: Die Komponente ist nicht vorhanden. Health Recommendation: - Ersetzen Sie die FRU, die diese Komponente enthält. Unhealthy Component ------------------- Component ID: Gehäuse 1, Controller B, Verwaltungsanschluss Health: Beeinträchtigt Health Reason: Das Netzwerkanschluss-Ethernet-Kabel ist abgezogen, oder das Netzwerk funktioniert nicht. Health Recommendation: - Ãberprüfen Sie, ob der Netzwerkanschluss des Controllers ordnungsgemäà mit dem Netzwerk verbunden ist. - Wenn dies der Fall ist, überprüfen Sie auf Netzwerkprobleme.
What can we do? I don't understand what's the problem.
Thank you!
HI ALL
We have a shared storage SN 2S6938D039, unfortunately we can't connect to it via web, ssh, telent, so we will try to restart the Management controller via cli port, in the interface of controller cli port is wrote SR232 micro-DB9.
Can anyone please share the cable reference should i use .
Thanks
Hi,
We have an EVA 4400. I noticed that the default disk group for the EVA had 12 disks in it and there were several ungrouped disks elsewhere in the array. So, I added them to the group, but it only let me add three. So, now, it has 15 disks in the group. Apparently, it's only licensed for up to 5 TB in a disk group, so it won't let me add more. I read elsewhere in the forum that you should add disks to groups in multiples of eight. So, I'm wondering if I should have removed four of the disks to make eight? Or, do the advantages outweigh the drawbacks of not using multiples of eight? Also, could someone explain what the drawbacks are of using a group not divisible by eight? Is it a reliability issue, or does it actually slow the array down? In other words, which is a better number of disks in the group: eight, 12, or 15?
Thanks,
Richard
Hi,
I have an issue with an ESXi 6.0 U3 hosts doing a PSOD. According to VMware the qLogic HBA firmware is crashing and I need to upgrade to V8.05.xx.
I can't find a download link for that version anywhere on the qLogic or HPE sites.
Can anyone point me in the right direction of the firmware?
Thanks
Graham
Hi Experts,
I have a HPUX 11.11 server with Timefinder, EMC symmetrix storage is using for BCV sync/Split and mount on Dev box to take backup. It has 3TB data on 96 LUNs, all were functioning well till last month. BCV incr job normally take hardly 5 min to complete all these years. Now it is taking almost 2 hours, mainly split operation. There was an IO in one of the LUN on storage, due to this time we had an outage also. Now storage is corrected and no IO erros on the LUN. But BCV split is still running around 2 hours. Help please.
Thanks,
Sahir